Grey Exterior Cement Based High Temperature Tile Adhesive / Ceramic
Pinbang Cement Based High Temperature Ceramic Tile Glue is a grey
cement based adhesive should be selected for most floor tiling with
porcelain or ceramic tiles, or with tiles that will grouted with
dark colours on a wall, suitable for fixing any kind of ceramic
tile to floors or walls in interiors or exteriors.
This type of tile adhesive or glue is used for general tiling on
solid concrete or masonry walls and floors. This tile adhesive or
glue is generally cheaper than other types of tile adhesive as it
is a basic cement based non flexible adhesive. This adhesive should
not be used on cracked cement floors or where some movement is
expected. It is supplied dry and is mixed with water before being
Field of Application:
1, Used for fixing high porosity tiles (water absorption more than
2, Used for fixing tiles on internal wall and floor.
3, Used for fixing tiles on dry and damp area.
4, Used for fixing tiles on rigid substrate.
5, Tiles fixed on walls suggested to be less than 20kg/㎡.
5 - 6kg/㎡ (typically one 25kg bag will cover 4.2 to 5 square metres).
4.8~5.6 liter / 20kg
|Mix Ratio with water|
25kg / 5.75liter
Min 3 hours
Resistance to Damp
Tensile Adhesive Strength (28 days )
|Rubber hammer, Trowel, Elec-mixer, Bucket, Notched Trowel|
1, Substrate should be flat, hard, level, dry, and clean with
2, Clean the surface until free of grease, dust or any stains.
3, Old paint or plaster should be removed.
4, Substrate been repaired should be preserved at least 48 hours.
1, May cause serious damage to eyes.
2, May be sensitive to skin in case of contact.
3, lrritable for eyes, respiratory system and skin.
4, Keep out of the reach of children.
5, Avoid breathing the dust.
6, In case of contact with eyes, rinse eyes immediately with plenty
of water and consult a doctor.
7, Wear suitable protective clothing, gloves and eye/face
Keep in a cool and dry place, unopened powder valid for one year.